START FEASIBILITY CHECK
For Australian Joinery Company Owners
FREE PROJECT FEASIBILITY CHECK

ProLink Free Project Feasibility Check

Tell us about your project. We’ll give you a preliminary view of whether offshore manufacturing is worth exploring.

This usually takes around 4 minutes. There are no right or wrong answers — just tell us what you know. At the end, you’ll see your preliminary result on screen and receive a confirmation email.
This is not a quotation, not a production commitment, and not a guarantee of cost, timing, or suitability. It is a preliminary indication based on the information you provide.
Project BasicsScope & CostMaterials & ComplexityYour Details & Result
STEP 1 OF 4 - PROJECT BASICS
Let’s start with the basics.

Tell us what type of project this is, where it’s located, and how much time you’re working with. If you’re still at an early stage, that’s fine — just tell us what you know.

Choose the option that best describes the main scope of work.
 
A full street address is not required.
Timing is one of the most important factors. As a general guide, offshore production and shipping usually require around 3 months from confirmed order.
This helps us understand how reliable the preliminary assessment can be.
STEP 2 OF 4 - SCOPE & COST
Tell us about the commercial side of this project.

This section helps us understand the scale of the job and whether there’s commercial pressure that makes it worth exploring an alternative production path.

Your best estimate of the local cabinet-only price or production cost, excluding benchtops, appliances, plumbing, electrical, and installation unless they are part of your cabinet package.
If you know the client’s budget indication or target range, this helps us understand the gap between local production cost and what the project can realistically support.
Why are you considering offshore manufacturing for this project? *
Select all that apply. This is one of the most useful signals for our assessment.
STEP 3 OF 4 - MATERIALS & COMPLEXITY
Tell us what this project is made of.

This section helps us identify whether the manufacturing requirements are well-suited to offshore production — because of specialist materials, complex geometry, hard-to-source finishes, or production depth.

What are the main materials or finishes in this project? *
Does this project include any of the following? *
STEP 4 OF 4 - YOUR DETAILS & RESULT
Your contact details

Enter your contact details below. Your preliminary result will be displayed on the next screen, and you’ll receive a branded confirmation email with your submitted information and next steps.

 
Your confirmation email and next steps will be sent to this address.
Including a phone number makes it easier for us to follow up directly if needed.
Mention anything that did not fit neatly into the questions above — timing, site constraints, unusual client requirements, freight considerations, difficult materials, or anything else relevant.
This online form does not collect drawings or project files. After submission, you can reply to the confirmation email with drawings, finish schedules, renders, or whatever project information you have available. Please keep each email under 30MB. For larger files, send a cloud link or split files across separate emails.
Please complete the required fields before continuing.
ProLink Solution collects the information you provide through this feasibility check to assess whether your project may be suitable for offshore manufacturing and to follow up with you about that assessment. Your information will not be sold or rented. See our Privacy Policy for details.
ProLink Free Feasibility Check

CONTACT PROLINK

Have a general question before submitting a project?

Use this enquiry form for general questions, resource enquiries, or capability example requests. For a project-specific suitability view, the Free Feasibility Check above is the best place to start.

Direct Contact

Send an enquiry

ProLink Contact / Enquiry